I tested the unit on a Zmodo 8ch DVR and once the correct settings were entered the DVR was able to control the camera. I used the mobile app on both the Iphone and Droid to control the camera. At the DVR location I used the viewing software on the computer to control its movements.
I then moved the unit to a Swann 8ch DVR. If you do this make sure you use the internet viewing sofware or mobile app software to control the camera. For some reason I could not get the DVR GUI to control the camera. Other than that issue the unit works fine with a Swann 8ch DVR as I only use the mobile app or internet app to control it.
The unit has been in service for a week now and I have had no issues with it. Overall I am very happy with this unit. Expect to spend several hours to get it working if you never worked with a PTZ camera before. I followed the guide and purchased a separate power supply for the camera and you also have to run a separate wire for the camera controls in addition to the video and power cable. I used CAT5 network cable because that is what I had laying around.
The only thing to make this product better is if Zmodo made some kind of bracket so this camera can be recessed mounted in the ceiling with just the dome part visible.I have the Zmodo 8 channel DVR that came with 4 cameras.... really inexpensive IR cameras that have terrible color (known issue) but that were more than adequate for my purpose. But I did have a nice location where I wanted to mount a PTZ camera so I kept an eye on this one to go on sale and grabbed one.... just installed it yesterday and WOW, I love it! It is set for Dipswitch 1 and I was replacing camera 2, so I had to remove the cover and move one switch, everything else was automatic. Oh, and I am currently using the 4 port power switch that came with the DVR (ordering a solo power source now) but the camera works great even tho everyone warns ya to get a solo power source. As some people pointed out, you will need to run 2 additional wires (I just used telephone wiring) to control the PTZ, and since I had to run the new wire anyway, I decided to upgrade the video/power cable that came with it with 100' I got from Menards. First off, the upgraded cables make a huge difference noticeable quality difference and no rolling lines and interference etc, so if I had to do it all again, I woulda started with upgraded cabling. But I was amazed at the low light capacity of this camera with NO IR capability, I wasn't expecting anything at night, but just the ambient light from the street lights makes the sidewalk visible etc while my stock IR camera is PITCH BLACK on the same area... It's not intended to be a night vision camera at all, so I was blown out of the water out of how good of a picture it gave me with ambient light only... the PTZ works with my DVR, computer and my iPad and iPhone... Color is good, range is good... I'm really happy with this upgrade to my system!
Buy Zmodo CM-T1001BG Weatherproof Pan 0 Degree-60 Degree and Tilt 0 Degree-90 Degree Camera Now
Nice camera and is working properly. If you don't need to zoom then it is the perfect camera to control small spaces.UPDATE:
Using the camera in the afternoon and the light starts to fade you can get lots of white interference lines and at low light they get really bad at slow speed.Works great have never had any problems with this camera what so ever. I love the fact that it is a real ptzEasy install and easy setup. Instructions weren't worth much but the camera works great. Excellent daytime picture and if you have enough light at night it is great. I have a lot of night vision cameras and they help light up things enough that I can tell my truck color at night. Great deal for the price!
No comments:
Post a Comment