Coolerguys 120x120x25mm USB Fan with Grill

I purchased a new PS3 for my kids to play games and for me to watch Bluray movies. I've been told that the PS3 runs hot and it might be a problem if kept in an enclosed TV cabinet. I purchased this USB fan with mounting kit. I cut a hole in the back panel of my cabinet to install the fan, then plugged it into the PS3. It turns on and off with the PS3. For a while I kept a digital thermometer in with the PS3, and the fan did a great job.

Product Description:

-1200 RPM

-Appox. 4-3/4" square x 1" deep

-This efficient little fan moves 44 CFM using only 1.15 watts of power.

-It's rated for 50,000 hours at 40C or 104F, (That's over 17 years @ 8 hrs/day)

-The USB cord is 20" long.

FYI A standard USB port supplies 5 vdc.

I mounted one of these in the top of an electrical motor control cabinet to eliminate heating issues.

A 4-1/2" holesaw works well for this application.

If you're planning to plug this fan into a 120v wall outlet, you'll need a 120v/usb adaptor.

These adaptors are also available from amazon and they don't cost much.

Buy Coolerguys 120x120x25mm USB Fan with Grill Now

First off I needed a fan to cool some components in a auido/video cabinet.

So I bought 2 of these and also 2 of the thermaltake usb Fans.

Bottom Line The thermaltake fans are cheaper and work much better.

i hooked these up to a powered usb supply which then was on a remote, so both fans are on a remote. otherwise if you plug them into your xbox they will always be on. They sound alittle louder then the xbox fan

With the cooler guys fan I could not feel any air coming out, noise level was alittle less then the thermaltake, but with thermaltake lower the adjustment and it made it the same noise level with alot more air coming out. The cable is very short when compared to the thermaltake and not adjustable.

So overall Go with the thermaltake fans, you will be much happier. Thermaltake fans Noise Level is great for the amount of air they push. These fans are adjustable so if they are to loud you can turn them down abit and you can still feel the air coming out. These fans are awesome for the price, they get the job done and the fans are well made, they have a stand that is removable if needed and cable is long if needed.

Read Best Reviews of Coolerguys 120x120x25mm USB Fan with Grill Here

Have had three Coolerguys USB Fans running in my entertainment center for over a year. Still running. Sound is very quiet. I love the USB fans. They do a great job of keeping the electronics cool while it is running. I would highly recommend.

Want Coolerguys 120x120x25mm USB Fan with Grill Discount?

I was looking for a 120mm USB fan that I could pair with my older model Roku XDS Streaming Player 1080p.

They are the exact same size, so this fan sits on top to pull hot air out of the unit (picture above).

The fan is quiet and provides sufficient airflow to keep the Roku cool.

I also considered Thermaltake AF0007 Mobile Fan 12 USB Fan * 120 mm Diameter 4.7 Height x 4.7 Width x 1.0 Depth but decided in favor of this one because:

1) The Coolerguys fan has a UBS passthrough plug, so you can still connect your external hard drive or other USB device without disconnecting the fan.

...(Thermaltake instead has a retractable cord).

2) The Coolerguys fan has all-black construction and doesn't stand out from the rest of my equipment.

...(Thermaltake instead has bare metal attachments).

3) The Coolerguys fan comes with 4 rubber feet that you can stick to bottom of the fan when it is mounted horizontally.

...(Thermaltake instead comes with a vertical stand).

4) The Thermaltake fan comes with a speed adjustment knob, but I decided that I didn't need it because I figured that either fan would already be quiet enough without being slowed down.

I also considered buying a standard 120mm computer case fan + USB or wall adapter, but the pricing in either case was comparable to the above.

If I could change one thing:

The sticky rubber feet -they are fine if you do not intend to move the device, but a better solution would be one that uses the pre-drilled holes in the corners (such as the rubber pushpins or gaskets that are normally used to reduce vibration when mounted to a computer case). That way you wouldn't have to worry about the feet falling off and getting lost (happened once during setup).